CaltechTHESIS
  A Caltech Library Service

Browse by Advisor

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Degree Date (Year Only) | Authors | No Grouping
Jump to: A | B | C | D | E | F | G | H | J | K | L | M | N | O | P | R | S | T | V | W
Number of items: 102.

A

Arbocz, Johann (1968) The effect of general imperfections on the buckling of cylindrical shells. Dissertation (Ph.D.), California Institute of Technology. doi:10.7907/DSCT-G640. https://resolver.caltech.edu/CaltechETD:etd-11292005-080202

Allardt, Frederick Hamilton (1937) The Brinelling of Small Ball Bearings. Master's thesis, California Institute of Technology. doi:10.7907/K872-W635. https://resolver.caltech.edu/CaltechETD:etd-10132005-103946

B

Bremmer, David Franklin (1975) An efficient approximate solution method for predicting the buckling of axially compressed imperfect cylindrical shells. Engineer's thesis, California Institute of Technology. doi:10.7907/S3M9-NT50. https://resolver.caltech.edu/CaltechTHESIS:09282010-112038866

Bhatia, Prem (1973) Buckling of imperfect circular cylindrical shells. Dissertation (Ph.D.), California Institute of Technology. doi:10.7907/FS7M-8D46. https://resolver.caltech.edu/CaltechTHESIS:08302010-162439924

Babcock, Charles Dwight (1962) The Buckling of Cylindrical Shells with an Initial Imperfection Under Axial Compression Loading. Dissertation (Ph.D.), California Institute of Technology. doi:10.7907/0P4A-SA39. https://resolver.caltech.edu/CaltechETD:etd-02242004-151013

Bell, Richard William (1958) The Elastic Instability of Thin Cantilever Struts on Elastic Supports with Axial and Transverse Loads at the Free End. Dissertation (Ph.D.), California Institute of Technology. doi:10.7907/5FEX-RT33. https://resolver.caltech.edu/CaltechETD:etd-10072004-093255

Berry, John Warren (1956) Fatigue of Aluminum as Affected by Temperature and Intermittent Periods of Rest. Engineer's thesis, California Institute of Technology. doi:10.7907/SNTV-ZX45. https://resolver.caltech.edu/CaltechETD:etd-03182004-143645

Brown, John R. (1949) A Critical Study of Spin-Up Drag Loads on Aircraft Landing Gears. Engineer's thesis, California Institute of Technology. doi:10.7907/PDPG-ET80. https://resolver.caltech.edu/CaltechETD:etd-01232009-153114

Bull, Edward George and Mastin, Robert L. (1947) Repeated Loads Above the Proportional Limit on 24ST Aluminum Alloy. Engineer's thesis, California Institute of Technology. doi:10.7907/BN3E-8T35. https://resolver.caltech.edu/CaltechETD:etd-12032008-093401

Burger, Glenn William and Daniels, Jerry Forest (1947) Design of an Instrument for Measuring the True Vertical Velocity of an Airplane at Moment of Contact in Landing. Engineer's thesis, California Institute of Technology. doi:10.7907/R4C9-D634. https://resolver.caltech.edu/CaltechETD:etd-12032008-140606

Beardsley, George Francis and Coates, Leonidas Dixon (1939) A Study of the Effect of Repeated Tension Impact Loads Upon Certain Metals Used in Aircraft Construction. Master's thesis, California Institute of Technology. doi:10.7907/R4GM-7G81. https://resolver.caltech.edu/CaltechETD:etd-01102006-132339

Bell, Willard Newton and Bussey, John Kenneth (1938) A Photoelastic Investigation of the Distribution of Shearing Stresses in a Stiffened Flat Panel. Master's thesis, California Institute of Technology. doi:10.7907/9JFS-SF60. https://resolver.caltech.edu/CaltechETD:etd-01102006-131047

Butterworth, Wesley Theodore (1938) Experimental Investigation of Ultimate Loads Carried by Flat, Unstiffened Panels Under Combined Shear and Compression. Master's thesis, California Institute of Technology. doi:10.7907/C57T-2C92. https://resolver.caltech.edu/CaltechETD:etd-12282005-095455

C

Chen, Jay-Chung (1972) Nonlinear vibration of cylindrical shells. Dissertation (Ph.D.), California Institute of Technology. doi:10.7907/CBC4-MP23. https://resolver.caltech.edu/CaltechTHESIS:09242010-085617930

Chase, Robert Apperson (1955) Pressurized Fuselage Stress Analysis. Dissertation (Ph.D.), California Institute of Technology. doi:10.7907/ZCGR-N460. https://resolver.caltech.edu/CaltechETD:etd-12022003-161233

Cooley, James Siggins (1949) Reversed Bending Fatigue Properties of 25 S-T, 75 S-T, and 76 S-T Aluminum Alloys. Engineer's thesis, California Institute of Technology. doi:10.7907/HNFP-NB63. https://resolver.caltech.edu/CaltechETD:etd-01262009-110934

D

Ditchey, Robert L. (1973) The effect of imperfections on the buckling of thin walled cylindrical shells. Engineer's thesis, California Institute of Technology. doi:10.7907/TPE9-EM80. https://resolver.caltech.edu/CaltechTHESIS:09232010-145835690

Dervishyan, Aram Ohannes (1952) Fatigue Stress Concentration Studies on Aluminum Alloys. Engineer's thesis, California Institute of Technology. doi:10.7907/4BCE-M652. https://resolver.caltech.edu/CaltechETD:etd-03232009-161109

Davis, Thomas V. (1948) Design of a Large Water Tunnel. Engineer's thesis, California Institute of Technology. doi:10.7907/H8HZ-D718. https://resolver.caltech.edu/CaltechETD:etd-12222008-143224

Durup, Paul Christian and Weisenberg, Joseph Oscar (1947) Lateral Stability of Thin Tapered Struts. Engineer's thesis, California Institute of Technology. doi:10.7907/FGGF-0080. https://resolver.caltech.edu/CaltechETD:etd-12032008-152413

Dixon, Howard Henry (1944) Investigation of Design Criteria of Stiffened Wood Curved Panels. Engineer's thesis, California Institute of Technology. doi:10.7907/HJ3Y-3F83. https://resolver.caltech.edu/CaltechETD:etd-11242008-145312

Dunn, Louis Gerhardus (1940) An Investigation of Sheet-Stiffener Panels Subjected to Compression Loads with Particular Reference to Torsionally Weak Stiffeners. Dissertation (Ph.D.), California Institute of Technology. doi:10.7907/84RM-ZH50. https://resolver.caltech.edu/CaltechETD:etd-04202004-154649

Dunn, Louis Gerhardus (1938) An Experimental Investigation of the Stresses in Extruded Sections Commonly Used in Aircraft Construction. Master's thesis, California Institute of Technology. doi:10.7907/9FAV-3513. https://resolver.caltech.edu/CaltechETD:etd-06242004-092300

E

Evensen, David Arthur (1964) Non-Linear Flexural Vibrations of Thin Circular Rings. Dissertation (Ph.D.), California Institute of Technology. doi:10.7907/7D5J-3C40. https://resolver.caltech.edu/CaltechETD:etd-09262002-165232

F

Fersht, Rena Scher (1968) Buckling of cylindrical shells with random imperfections. Dissertation (Ph.D.), California Institute of Technology. doi:10.7907/KF7B-XA89. https://resolver.caltech.edu/CaltechETD:etd-11142005-105632

Fourney, Michael Eugene (1963) I. On the Application of a Laser to High Speed Photography. II. Torsional Magnetoelastic Waves in a Circular Cylinder. Dissertation (Ph.D.), California Institute of Technology. doi:10.7907/6M9E-V056. https://resolver.caltech.edu/CaltechETD:etd-12082005-131705

Ford, Warren Woodrow (1949) Design of a Six Component Internal Strain Gage Balance System. Engineer's thesis, California Institute of Technology. doi:10.7907/8DE6-1J31. https://resolver.caltech.edu/CaltechETD:etd-01222009-132301

Fung, Yuan-cheng (1948) Elastostatic and Aereolastic Problems Relating to Thin Wings of High Speed Airplanes. Dissertation (Ph.D.), California Institute of Technology. doi:10.7907/JK8Q-RH35. https://resolver.caltech.edu/CaltechETD:etd-05222003-165709

Fredrick, Joseph Louis (1940) The Failure of Thin-Walled Semi-Elliptical Cylinders Under Torsion. Master's thesis, California Institute of Technology. doi:10.7907/31X1-Q070. https://resolver.caltech.edu/CaltechETD:etd-11132008-142412

Fan, Hsu-Tsi (1939) A Study of "Shear Lag" Phenomenon in a Stiffened Flat Panel by Photoelastic Methods. Master's thesis, California Institute of Technology. doi:10.7907/WANC-TP12. https://resolver.caltech.edu/CaltechETD:etd-12282005-161537

G

Giraudbit, Jean-Noël (1972) Optimal simple structures with bending and membrane stresses. Engineer's thesis, California Institute of Technology. doi:10.7907/29PJ-3X76. https://resolver.caltech.edu/CaltechTHESIS:10132010-094217970

Gloria, Ruben M. (1957) The Failure of Pressurized Thin-Walled Cylinders. Engineer's thesis, California Institute of Technology. doi:10.7907/VQNF-4J52. https://resolver.caltech.edu/CaltechETD:etd-06292004-150847

Gaibler, Richard (1952) Column Creep of 75S-T6 Aluminum Alloy. Engineer's thesis, California Institute of Technology. doi:10.7907/DTB9-Y232. https://resolver.caltech.edu/CaltechETD:etd-03302009-084055

Garrett, Joseph (1949) Experimental Deflection Survey of Cantilever Sectors of Uniform Thickness. Engineer's thesis, California Institute of Technology. doi:10.7907/YP13-NN87. https://resolver.caltech.edu/CaltechETD:etd-01232009-143754

Goebel, Thomas Parker (1949) An Investigation of the Deformation of a 3S-O Sheet Specimen During Tensile Failure. Engineer's thesis, California Institute of Technology. doi:10.7907/06BQ-R471. https://resolver.caltech.edu/CaltechETD:etd-01222009-091511

Gibbons, Robert Martin and Dill, Douglas Gordon (1942) A Photoelastic Investigation of the Effect of Elliptical and Modified Cutouts in Flat Panels Subjected to Combined Bending and Shear. Engineer's thesis, California Institute of Technology. doi:10.7907/36WR-QZ84. https://resolver.caltech.edu/CaltechTHESIS:08242010-095944937

Gentner, William Ellis and Biglow, James Otis (1940) A Study of the Effect of Repeated Tension Impact Loads Upon Certain Metals Used in Aircraft Construction. Master's thesis, California Institute of Technology. doi:10.7907/93VQ-ED36. https://resolver.caltech.edu/CaltechTHESIS:04252011-080056433

H

Hegemier, Gilbert Arthur (1964) Stability of Thin Cylindrical Shells Subjected to a Class of Axially Symmetric Moving Loads. Dissertation (Ph.D.), California Institute of Technology. doi:10.7907/4P8K-YN54. https://resolver.caltech.edu/CaltechETD:etd-10112002-121702

Hardy, Donald James (1949) The Effect of Surface Roughness upon 25 ST Aluminum Alloy Subjected to Repeated Tensile Stresses Above the Proportional Limit. Engineer's thesis, California Institute of Technology. doi:10.7907/Q6A7-1796. https://resolver.caltech.edu/CaltechETD:etd-01272009-083535

Harmon, Leonard Edward (1949) Stress, Distribution in Two Circular Cylinders Intersecting at Right Angles Under the Influence of Internal Pressure. Engineer's thesis, California Institute of Technology. doi:10.7907/RMGJ-1S84. https://resolver.caltech.edu/CaltechTHESIS:07092015-164255953

Henry, William Earl (1949) Experimental Deflection Survey of Cantilever Sectors of Uniform Thickness. Engineer's thesis, California Institute of Technology. doi:10.7907/A463-DC95. https://resolver.caltech.edu/CaltechETD:etd-01282009-152036

Hege, Jeremiah Collins and Goebel, Thomas Parker (1945) An Experimental Investigation of the Effect of Lip on the Column Strength of Rolled Sheet Zee and Angle Sections. Master's thesis, California Institute of Technology. doi:10.7907/HM7P-CK04. https://resolver.caltech.edu/CaltechTHESIS:05242011-153838445

Hanger, Willard Muirhead (1943) A Photoelastic Investigation of the Effect of Elliptical and Modified Cutouts in Flat Panels Subjected to Combined Bending and Shear. Engineer's thesis, California Institute of Technology. doi:10.7907/6M05-2809. https://resolver.caltech.edu/CaltechETD:etd-11182008-133221

Howland, Walter Lavern (1939) Strength of Thin-Walled Elliptical Cylinders Supported at the Minor Axis. Dissertation (Ph.D.), California Institute of Technology. doi:10.7907/KQK7-V396. https://resolver.caltech.edu/CaltechTHESIS:10012015-161848918

Howland, Walter Lavern (1936) Effect of Rivet Spacing on Stiffened Thin Sheet Under Compression. Master's thesis, California Institute of Technology. doi:10.7907/KCDP-9732. https://resolver.caltech.edu/CaltechETD:etd-07182007-093403

J

James, George Thomas (1955) The Effect of Adhesive Coating on the Fatigue Properties of 2014-T and 7075-T at Normal and Elevated Temperatures. Engineer's thesis, California Institute of Technology. doi:10.7907/AX4T-KX34. https://resolver.caltech.edu/CaltechETD:etd-01062004-163541

Joga Rao, Chintakindi Venkata (1948) Repeated Loads Above the Proportional Limit on 24st Aluminum Alloy. Engineer's thesis, California Institute of Technology. doi:10.7907/V8T5-YS83. https://resolver.caltech.edu/CaltechETD:etd-12162008-133111

K

Kendall, Frank (1973) An experimental investigation of the nonlinear vibration of cylindrical shells. Engineer's thesis, California Institute of Technology. doi:10.7907/Q4F6-C984. https://resolver.caltech.edu/CaltechTHESIS:09242010-083549862

Kulkarni, Arun N. (1972) Analysis of the airline systems performance by varying inputs, viz. jet aircraft, routes and scheduling. Engineer's thesis, California Institute of Technology. doi:10.7907/C94H-PP45. https://resolver.caltech.edu/CaltechETD:etd-07102007-093646

Kauffman, Ralph J. (1952) An Investigation of Creep in Light Metal Alloys. Engineer's thesis, California Institute of Technology. doi:10.7907/HB4M-3P19. https://resolver.caltech.edu/CaltechETD:etd-03302009-061536

Kane, John Clarence (1950) Correlation of Fatigue Data to Determine Stress Concentration Factors in 76s-T Aluminum Alloys. Engineer's thesis, California Institute of Technology. doi:10.7907/FHCF-VX77. https://resolver.caltech.edu/CaltechETD:etd-02092009-081322

Kleiss, Norman Jack and Kerkering, Stanley William (1946) Some Studies of Expansion Rings in Rocket Motors. Engineer's thesis, California Institute of Technology. doi:10.7907/CD3E-ZE50. https://resolver.caltech.edu/CaltechETD:etd-12242008-094536

Kanemitsu, Sunao and Nojima, Noble M. (1939) Axial Compression Test of Thin Circular Cylinders. A. Length Effect. B. Visual Study of Buckling. Master's thesis, California Institute of Technology. doi:10.7907/HBZ9-MZ48. https://resolver.caltech.edu/CaltechETD:etd-12052005-105325

Kitsuda, Kaname (1935) Investigation of Stress Distribution on Thin Metal Sheet With Holes. Master's thesis, California Institute of Technology. doi:10.7907/921K-MD80. https://resolver.caltech.edu/CaltechETD:etd-03112005-134957

L

Lee, Jen-shih (1966) Application of Finite Elastic Theory to the Deformation of Cylindrical Tubes. Dissertation (Ph.D.), California Institute of Technology. doi:10.7907/HM2E-AX28. https://resolver.caltech.edu/CaltechETD:etd-12052005-150440

Lindsley, Jack Nathan (1953) The Effect of Temperature Cycling on the Physical Properties of FS-1 Magnesium Alloy Sheet Metal. Engineer's thesis, California Institute of Technology. doi:10.7907/N1M2-JG59. https://resolver.caltech.edu/CaltechETD:etd-04252003-081930

Lurie, Harold (1950) Lateral Vibrations as Related to Structural Stability. Dissertation (Ph.D.), California Institute of Technology. doi:10.7907/0P9M-XM21. https://resolver.caltech.edu/CaltechETD:etd-07092007-131041

Lamb, William Emerson (1949) Fatigue Strength of Metal Sandwich Type Construction. Engineer's thesis, California Institute of Technology. doi:10.7907/YEGJ-XT59. https://resolver.caltech.edu/CaltechETD:etd-01282009-095113

Lee, Edwin Samuel and Sterling, Cedric Warren (1943) A Correlation of Repeated Tension Impact Tests with Other Tension Tests of 17ST Duralumin. Engineer's thesis, California Institute of Technology. doi:10.7907/VP8E-Q282. https://resolver.caltech.edu/CaltechETD:etd-12032008-153139

Lovett, Benjamin Barnes Compton and Rodee, Walter Fred (1936) Transfer of Stress from Main Beams to Intermediate Stiffeners in Metal Sheet Covered Box Beams. Master's thesis, California Institute of Technology. doi:10.7907/MAAF-MM48. https://resolver.caltech.edu/CaltechETD:etd-01272006-091759

M

Majumdar, Suarindranath (1968) Buckling of thin annular plates due to radial compressive loading. Engineer's thesis, California Institute of Technology. doi:10.7907/QAE9-G437. https://resolver.caltech.edu/CaltechETD:etd-11112005-152910

McCoy, John Carver (1958) An Experimental Investigation of the General Instability of Ring-Stiffened, Unpressurized, Thin-Walled Cylinders Under Axial Compression. Engineer's thesis, California Institute of Technology. doi:10.7907/TR8H-6D86. https://resolver.caltech.edu/CaltechETD:etd-01102006-133017

Martin, Harold Clifford (1950) Elastic Instability of Cantilever Struts Under Combined Axial and Transverse Forces at the Free End. Dissertation (Ph.D.), California Institute of Technology. doi:10.7907/F3YJ-3D63. https://resolver.caltech.edu/CaltechETD:etd-02272009-130215

Matzdorff, Roger Edward (1950) Castable Plastics in Photoelastics Stress Analysis. Engineer's thesis, California Institute of Technology. doi:10.7907/1CAZ-4A36. https://resolver.caltech.edu/CaltechETD:etd-02182009-112040

Mechling, Wallace Bristol and Jack, Samuel Sloan (1938) An Evaluation of the Tension Impact Test by Correlation With the Physical Properties of Aluminum Alloys. Master's thesis, California Institute of Technology. doi:10.7907/7XWB-QP81. https://resolver.caltech.edu/CaltechETD:etd-07192007-104706

Mellinger, George Rolland and Kurihara, Hisayuki (1938) Shear Transfer of Load From Main Beams to Intermediate Corrugations in Metal Sheet Covered Box Beams. Master's thesis, California Institute of Technology. doi:10.7907/5751-Y722. https://resolver.caltech.edu/CaltechETD:etd-01262006-140318

Moore, Charles Kenneth and Nollan, John Lloyd (1937) Age Hardening of Heat Treated Aluminum Alloy. An Investigation of the Fluctuation of Hardness with Time of Ageing of Heat Treated Aluminum Alloy Sheet. Master's thesis, California Institute of Technology. doi:10.7907/3G1Z-F889. https://resolver.caltech.edu/CaltechETD:etd-03212005-103521

Magden, John Leslie (1934) A Preliminary Investigation of Rivets and Riveted Joints in Metal Airplane Construction. Master's thesis, California Institute of Technology. doi:10.7907/MWT3-P557. https://resolver.caltech.edu/CaltechETD:etd-07172007-081411

N

Nelson, Conrad Nathaniel (1948) Repeated Loads Above the Proportional Limit on 24-ST Aluminum Alloy. Engineer's thesis, California Institute of Technology. doi:10.7907/V6ZX-5G92. https://resolver.caltech.edu/CaltechETD:etd-12192008-105659

Nagamatsu, Henry Takeshi (1940) Experimental Investigation of Ultimate Loads Carried by Flat, Unstiffened Panels Under Combined Shear and Compression. Master's thesis, California Institute of Technology. doi:10.7907/FNQF-4Q12. https://resolver.caltech.edu/CaltechETD:etd-11142008-140614

O

Ogilvie, Douglas Clark (1949) Correlation of Existing Design Information on Sandwich Construction. Engineer's thesis, California Institute of Technology. doi:10.7907/F4C5-0536. https://resolver.caltech.edu/CaltechETD:etd-02112009-154609

Ours, Statton Ray and Jackson, William Gauss (1944) An Investigation of the Effects of Weight Geometry and Time in Repeated Tension Impact Testing. Engineer's thesis, California Institute of Technology. doi:10.7907/G8NX-JD54. https://resolver.caltech.edu/CaltechETD:etd-11252008-093713

Olsen, Carl Baker and Brown, Sheldon Willis (1942) A Study of the Effects of Repeated Tension Impact Loads Upon Certain Metals Used in Aircraft Construction. Engineer's thesis, California Institute of Technology. doi:10.7907/RXJQ-C567. https://resolver.caltech.edu/CaltechETD:etd-11072008-100137

P

Parmerter, Robert Reid (1964) The Buckling of Clamped Shallow Spherical Shells Under Uniform Pressure. Dissertation (Ph.D.), California Institute of Technology. doi:10.7907/R18G-ZC96. https://resolver.caltech.edu/CaltechETD:etd-10212002-112304

Peck, Jerry Clifford (1959) Bending-Torsion Flutter of an Airfoil with Nonlinear Structural Characteristics. Engineer's thesis, California Institute of Technology. doi:10.7907/P0DS-PX18. https://resolver.caltech.edu/CaltechETD:etd-02132006-152832

Ponsford, Henry Thomas (1953) The Effects of Stiffness on the Buckling of Cylinders with Moderate Wall Thickness. Dissertation (Ph.D.), California Institute of Technology. doi:10.7907/JAYX-PF29. https://resolver.caltech.edu/CaltechETD:etd-05082003-160210

Putt, Donald Leander (1938) Experimental Investigation of the Thickness of the Boundary Layer and the Location of the Transitional Region Along a Wing Section. Master's thesis, California Institute of Technology. doi:10.7907/ZZVX-7082. https://resolver.caltech.edu/CaltechETD:etd-01092006-152711

Parr, Warren Sherman and Beakley, Wallace Morris (1935) Investigation of Duralumin Channel Section Strut Under Compression. Master's thesis, California Institute of Technology. doi:10.7907/9VQN-K047. https://resolver.caltech.edu/CaltechETD:etd-12222005-115855

R

Robinson, Winthrop Pratt (1953) The Effect of Temperature Ccycling on the Physical Properties of 75S-T6 Aluminum Alloy Sheet Metal. Engineer's thesis, California Institute of Technology. doi:10.7907/GEHN-V977. https://resolver.caltech.edu/CaltechETD:etd-05122003-121943

Ringness, William Merritt (1949) The Effect of Surface Roughness upon 25 ST Aluminum Alloy Subjected to Repeated Tensile Stresses Above the Proportional Limit. Engineer's thesis, California Institute of Technology. doi:10.7907/WH57-T868. https://resolver.caltech.edu/CaltechETD:etd-02022009-093120

Reiserer, Russell Lawrence and Barden, Kenneth Perrin (1947) Design and Test of a Rocket Motor Expansion Joint. Engineer's thesis, California Institute of Technology. doi:10.7907/CM3Y-6453. https://resolver.caltech.edu/CaltechETD:etd-12102008-090658

S

Starnes, James Herbert (1970) The Effect of a Circular Hole on the Buckling of Cylindrical Shells. Dissertation (Ph.D.), California Institute of Technology. doi:10.7907/VGHN-EQ52. https://resolver.caltech.edu/CaltechETD:etd-04012009-110903

Stuart, Floyd Ronald (1963) The Buckling of Thin Walled Circular Cylindrical Shells Under Combined Axial Compression and Bending. Engineer's thesis, California Institute of Technology. doi:10.7907/0SEM-H188. https://resolver.caltech.edu/CaltechETD:etd-10172005-131305

Sullivan, Timothy Lay (1961) The Effect of Floating Rings on the Stability of Longitudinally Stiffened Cylinders in Axial Compression. Engineer's thesis, California Institute of Technology. doi:10.7907/3MBR-S755. https://resolver.caltech.edu/CaltechETD:etd-12212005-135322

Stalk, George (1955) A Study of Fatigue Notch Sensitivity of 2014-T and 7075-T at Elevated Temperatures. Engineer's thesis, California Institute of Technology. doi:10.7907/A948-ZS36. https://resolver.caltech.edu/CaltechETD:etd-01272004-110905

Solverson, Robert Richard (1953) Stress Concentrations in Fillets. Dissertation (Ph.D.), California Institute of Technology. doi:10.7907/M29Q-K453. https://resolver.caltech.edu/CaltechETD:etd-05122003-105323

Shepherd, John Tyler (1950) Correlation of Fatigue Data to Determine Stress Concentration Factors in 76S-T Aluminum Alloys. Engineer's thesis, California Institute of Technology. doi:10.7907/XMFM-KC84. https://resolver.caltech.edu/CaltechETD:etd-03062009-160046

Sanders, Lewis B. (1947) An Investigation of Inspection Criteria for Countersunk Rivets. Engineer's thesis, California Institute of Technology. doi:10.7907/X2ZV-8G18. https://resolver.caltech.edu/CaltechETD:etd-12082008-091447

Soli, Orlan Alton and Ditch, William Earl (1947) A Study of the Effects of Rapidly Applied Loads and Repeated Loads on Countersunk Riveted Joints. Engineer's thesis, California Institute of Technology. doi:10.7907/WEWA-8A78. https://resolver.caltech.edu/CaltechETD:etd-12192008-111017

Sweeney, William Edward and Bridgland, Edgar Parsons (1943) Investigation of Design Criteria of Stiffened Wooden Panels. Engineer's thesis, California Institute of Technology. doi:10.7907/4YVN-3R91. https://resolver.caltech.edu/CaltechETD:etd-12242008-113646

Smith, Joe Nelson and Murphy, Joseph Nathaniel (1937) Investigation of Extended Bulb Angle Sections Under Compression: Part One. As Euler Columns ; Part Two. As Stiffeners Attached to Sheet. Master's thesis, California Institute of Technology. doi:10.7907/R62Z-6P10. https://resolver.caltech.edu/CaltechETD:etd-04252008-093950

T

Toda, Susumu (1975) The effects of elliptic and rectangular cutouts on the buckling of cylindrical shells loaded by axial compression. Engineer's thesis, California Institute of Technology. doi:10.7907/473V-C743. https://resolver.caltech.edu/CaltechETD:etd-12042006-090542

Tyson, Thomas Janney (1967) Laminar boundary layers in the neighborhood of abrupt spatial disturbances. Dissertation (Ph.D.), California Institute of Technology. doi:10.7907/S72R-AM75. https://resolver.caltech.edu/CaltechETD:etd-11032003-111459

Tong, Pin (1966) Liquid Sloshing in an Elastic Container. Dissertation (Ph.D.), California Institute of Technology. doi:10.7907/WYZD-Q384. https://resolver.caltech.edu/CaltechTHESIS:08202010-092311496

Thatcher, Roland Churchill (1952) Short Time Compressive Creep in 75S-T6 and 25S-T6 Aluminum Alloy Short Columns. Engineer's thesis, California Institute of Technology. doi:10.7907/DFBM-7A50. https://resolver.caltech.edu/CaltechETD:etd-03302009-083614

Teig, Vernon Ellwood (1949) Stress Distribution in Two Intersecting Cylinders Under Pressure. Engineer's thesis, California Institute of Technology. doi:10.7907/9QC1-C818. https://resolver.caltech.edu/CaltechETD:etd-02272009-160414

Tyra, Thomas Donald and Hollister, William Wallace (1941) A Photoelastic Investigation of the Effect of Cutouts in Panels Subject to Shear and Bending. Engineer's thesis, California Institute of Technology. doi:10.7907/Q4B3-CJ36. https://resolver.caltech.edu/CaltechETD:etd-11172008-105645

Tsubota, George Yoshio (1939) Experimental Investigation of Ultimate Loads Carried by Flat, Unstiffened Panels Under Combined Shear and Compression. Master's thesis, California Institute of Technology. doi:10.7907/ZDZH-Y940. https://resolver.caltech.edu/CaltechETD:etd-12222005-104133

V

Valluri, Sitaram Rao (1954) Some Studies in the Fundamental Parameters of Fatigue. Dissertation (Ph.D.), California Institute of Technology. doi:10.7907/5Y4Z-CW45. https://resolver.caltech.edu/CaltechETD:etd-01292004-104442

W

Wojcik, Gregory Lynn (1977) Self-similar elastodynamic solutions for the plane wedge. Dissertation (Ph.D.), California Institute of Technology. doi:10.7907/E1D3-0T11. https://resolver.caltech.edu/CaltechETD:etd-11132006-080224

Williams, Max Lea (1950) The Plate Problem for a Cantilever Sector of Uniform Thickness. Dissertation (Ph.D.), California Institute of Technology. doi:10.7907/WFM9-RR55. https://resolver.caltech.edu/CaltechETD:etd-07202004-095445

Williams, Max L. (1948) Maximum Stress in a Cylindrical Bar of Double Wedge Cross Section Under Torsion. Engineer's thesis, California Institute of Technology. doi:10.7907/52Z6-WX56. https://resolver.caltech.edu/CaltechETD:etd-05222003-090841

This list was generated on Tue Mar 19 06:09:44 2024 UTC.