Number of items: 94.
Wojcik, Gregory Lynn
(1977)
Self-similar elastodynamic solutions for the plane wedge.
Dissertation (Ph.D.), California Institute of Technology.
http://resolver.caltech.edu/CaltechETD:etd-11132006-080224
Bremmer, David Franklin
(1975)
An efficient approximate solution method for predicting the buckling of axially compressed imperfect cylindrical shells.
Engineer's thesis, California Institute of Technology.
http://resolver.caltech.edu/CaltechTHESIS:09282010-112038866
Toda, Susumu
(1975)
The effects of elliptic and rectangular cutouts on the buckling of cylindrical shells loaded by axial compression.
Engineer's thesis, California Institute of Technology.
http://resolver.caltech.edu/CaltechETD:etd-12042006-090542
Bhatia, Prem
(1973)
Buckling of imperfect circular cylindrical shells.
Dissertation (Ph.D.), California Institute of Technology.
http://resolver.caltech.edu/CaltechTHESIS:08302010-162439924
Ditchey, Robert L.
(1973)
The effect of imperfections on the buckling of thin walled cylindrical shells.
Engineer's thesis, California Institute of Technology.
http://resolver.caltech.edu/CaltechTHESIS:09232010-145835690
Kendall, Frank
(1973)
An experimental investigation of the nonlinear vibration of cylindrical shells.
Engineer's thesis, California Institute of Technology.
http://resolver.caltech.edu/CaltechTHESIS:09242010-083549862
Chen, Jay-Chung
(1972)
Nonlinear vibration of cylindrical shells.
Dissertation (Ph.D.), California Institute of Technology.
http://resolver.caltech.edu/CaltechTHESIS:09242010-085617930
Giraudbit, Jean-Noël
(1972)
Optimal simple structures with bending and membrane stresses.
Engineer's thesis, California Institute of Technology.
http://resolver.caltech.edu/CaltechTHESIS:10132010-094217970
Kulkarni, Arun N.
(1972)
Analysis of the airline systems performance by varying inputs, viz. jet aircraft, routes and scheduling.
Engineer's thesis, California Institute of Technology.
http://resolver.caltech.edu/CaltechETD:etd-07102007-093646
Starnes, James Herbert
(1970)
The effect of a circular hole on the buckling of cylindrical shells.
Dissertation (Ph.D.), California Institute of Technology.
http://resolver.caltech.edu/CaltechETD:etd-04012009-110903
Arbocz, Johann
(1968)
The effect of general imperfections on the buckling of cylindrical shells.
Dissertation (Ph.D.), California Institute of Technology.
http://resolver.caltech.edu/CaltechETD:etd-11292005-080202
Fersht, Rena Scher
(1968)
Buckling of cylindrical shells with random imperfections.
Dissertation (Ph.D.), California Institute of Technology.
http://resolver.caltech.edu/CaltechETD:etd-11142005-105632
Majumdar, Suarindranath
(1968)
Buckling of thin annular plates due to radial compressive loading.
Engineer's thesis, California Institute of Technology.
http://resolver.caltech.edu/CaltechETD:etd-11112005-152910
Beebe, Wayne Metcalf
(1967)
An experimental investigation of dynamic crack propagation in plastic and metals.
Dissertation (Ph.D.), California Institute of Technology.
http://resolver.caltech.edu/CaltechETD:etd-09262005-152806
Tyson, Thomas Janney
(1967)
Laminar boundary layers in the neighborhood of abrupt spatial disturbances.
Dissertation (Ph.D.), California Institute of Technology.
http://resolver.caltech.edu/CaltechETD:etd-11032003-111459
Tong, Pin
(1966)
Liquid sloshing in an elastic container.
Dissertation (Ph.D.), California Institute of Technology.
http://resolver.caltech.edu/CaltechTHESIS:08202010-092311496
Fourney, Michael E.
(1963)
I. On the application of a laser to high speed photography. II. Torsional magnetoelastic waves in a circular cylinder.
Dissertation (Ph.D.), California Institute of Technology.
http://resolver.caltech.edu/CaltechETD:etd-12082005-131705
Stuart, Floyd R.
(1963)
The buckling of thin walled circular cylindrical shells under combined axial compression and bending.
Engineer's thesis, California Institute of Technology.
http://resolver.caltech.edu/CaltechETD:etd-10172005-131305
Babcock, Charles D.
(1962)
The buckling of cylindrical shells with an initial imperfection under axial compression loading.
Dissertation (Ph.D.), California Institute of Technology.
http://resolver.caltech.edu/CaltechETD:etd-02242004-151013
Sullivan, Timothy Lay
(1961)
The effect of floating rings on the stability of longitudinally stiffened cylinders in axial compression.
Engineer's thesis, California Institute of Technology.
http://resolver.caltech.edu/CaltechETD:etd-12212005-135322
Peck, Jerry Clifford
(1959)
Bending-torsion flutter of an airfoil with nonlinear structural characteristics.
Engineer's thesis, California Institute of Technology.
http://resolver.caltech.edu/CaltechETD:etd-02132006-152832
Bell, Richard William
(1958)
The elastic instability of thin cantilever struts on elastic supports with axial and transverse loads at free end.
Dissertation (Ph.D.), California Institute of Technology.
http://resolver.caltech.edu/CaltechETD:etd-10072004-093255
McCoy, John C.
(1958)
An experimental investigation of the general instability of ring-stiffened, unpressurized, thin-walled cylinders under axial compression.
Engineer's thesis, California Institute of Technology.
http://resolver.caltech.edu/CaltechETD:etd-01102006-133017
Gloria, Ruben M.
(1957)
The failure of pressurized thin-walled cylinders.
Engineer's thesis, California Institute of Technology.
http://resolver.caltech.edu/CaltechETD:etd-06292004-150847
Berry, John Warren
(1956)
Fatigue of aluminum as affected by temperature and intermittent periods of rest.
Engineer's thesis, California Institute of Technology.
http://resolver.caltech.edu/CaltechETD:etd-03182004-143645
James, George T.
(1955)
The effect of adhesive coating on the fatigue properties of 2014-T and 7075-T at normal and elevated temperatures.
Engineer's thesis, California Institute of Technology.
http://resolver.caltech.edu/CaltechETD:etd-01062004-163541
Stalk, George
(1955)
A study of fatigue notch sensitivity of 2014-T and 7075-T at elevated temperatures.
Engineer's thesis, California Institute of Technology.
http://resolver.caltech.edu/CaltechETD:etd-01272004-110905
Valluri, S. R.
(1954)
Some studies in the fundamental parameters of fatigue.
Dissertation (Ph.D.), California Institute of Technology.
http://resolver.caltech.edu/CaltechETD:etd-01292004-104442
Robinson, Winthrop P.
(1953)
The effect of temperature cycling on the physical properties of 75S-T6 aluminum alloy sheet metal.
Engineer's thesis, California Institute of Technology.
http://resolver.caltech.edu/CaltechETD:etd-05122003-121943
Dervishyan, Aram O.
(1952)
Fatigue stress concentration studies on aluminum alloys.
Engineer's thesis, California Institute of Technology.
http://resolver.caltech.edu/CaltechETD:etd-03232009-161109
Gaibler, Richard
(1952)
Column creep of 75S-T6 aluminum alloy.
Engineer's thesis, California Institute of Technology.
http://resolver.caltech.edu/CaltechETD:etd-03302009-084055
Kauffman, Ralph J.
(1952)
An investigation of creep in light metal alloys.
Engineer's thesis, California Institute of Technology.
http://resolver.caltech.edu/CaltechETD:etd-03302009-061536
Thatcher, Roland C.
(1952)
Short time compressive creep in 75S-T6 and 25S-T6 aluminum alloy short columns.
Engineer's thesis, California Institute of Technology.
http://resolver.caltech.edu/CaltechETD:etd-03302009-083614
Kane, John C.
(1950)
Correlation of fatigue data to determine stress concentration factors in 76S-T aluminum alloys.
Engineer's thesis, California Institute of Technology.
http://resolver.caltech.edu/CaltechETD:etd-02092009-081322
Lurie, Harold
(1950)
Lateral vibrations as related to structural stability.
Dissertation (Ph.D.), California Institute of Technology.
http://resolver.caltech.edu/CaltechETD:etd-07092007-131041
Martin, Harold Clifford
(1950)
Elastic instability of cantilever struts under combined axial and transverse forces at the free end.
Dissertation (Ph.D.), California Institute of Technology.
http://resolver.caltech.edu/CaltechETD:etd-02272009-130215
Matzdorff, Roger E.
(1950)
Castable plastics in photoelastics stress analysis.
Engineer's thesis, California Institute of Technology.
http://resolver.caltech.edu/CaltechETD:etd-02182009-112040
Shepherd, John T.
(1950)
Correlation of fatigue data to determine stress concentration factors in 76S-T aluminum alloys.
Engineer's thesis, California Institute of Technology.
http://resolver.caltech.edu/CaltechETD:etd-03062009-160046
Brown, John R.
(1949)
A critical study of spin-up drag loads on aircraft landing gears.
Engineer's thesis, California Institute of Technology.
http://resolver.caltech.edu/CaltechETD:etd-01232009-153114
Cooley, J. S.
(1949)
Reversed bending fatigue properties of 25 S-T, 75 S-T, and 76 S-T aluminum alloys.
Engineer's thesis, California Institute of Technology.
http://resolver.caltech.edu/CaltechETD:etd-01262009-110934
Ford, W. W.
(1949)
Design of a six component internal strain gage balance system.
Engineer's thesis, California Institute of Technology.
http://resolver.caltech.edu/CaltechETD:etd-01222009-132301
Garrett, J.
(1949)
Experimental deflection survey of cantilever sectors of uniform thickness.
Engineer's thesis, California Institute of Technology.
http://resolver.caltech.edu/CaltechETD:etd-01232009-143754
Goebel, Thomas Parker
(1949)
An investigation of the deformation of a 38-O sheet specimen during tensile failure.
Engineer's thesis, California Institute of Technology.
http://resolver.caltech.edu/CaltechETD:etd-01222009-091511
Hardy, Donald J.
(1949)
The effect of surface roughness upon 25 st aluminum alloy subjected to repeated tensile stresses above the proportional limit.
Engineer's thesis, California Institute of Technology.
http://resolver.caltech.edu/CaltechETD:etd-01272009-083535
Henry, William E.
(1949)
Experimental deflection survey of cantilever sectors of uniform thickness.
Engineer's thesis, California Institute of Technology.
http://resolver.caltech.edu/CaltechETD:etd-01282009-152036
Lamb, William E.
(1949)
Fatigue strength of metal sandwich type construction.
Engineer's thesis, California Institute of Technology.
http://resolver.caltech.edu/CaltechETD:etd-01282009-095113
Mason, David M.
(1949)
Temperature and velocity distribution in the wake of a heated cylinder.
Dissertation (Ph.D.), California Institute of Technology.
http://resolver.caltech.edu/CaltechETD:etd-06242004-092715
Ogilvie, Douglas C.
(1949)
Correlation of existing design information on sandwich construction.
Engineer's thesis, California Institute of Technology.
http://resolver.caltech.edu/CaltechETD:etd-02112009-154609
Pinkerton, Charles C.
(1949)
Experimental determination of the thermal conductivity of porous copper.
Engineer's thesis, California Institute of Technology.
http://resolver.caltech.edu/CaltechETD:etd-01282009-130000
Ringness, William M.
(1949)
The effect of surface roughness upon 25 st aluminum alloy subjected to repeated tensile stresses above the proportional limit.
Engineer's thesis, California Institute of Technology.
http://resolver.caltech.edu/CaltechETD:etd-02022009-093120
Teig, Vernon E
(1949)
Stress distribution in two intersecting cylinders under pressure.
Engineer's thesis, California Institute of Technology.
http://resolver.caltech.edu/CaltechETD:etd-02272009-160414
Burger, Glenn W.
(1948)
Design of an instrument for measuring the true vertical velocity of an airplane at moment of contact in landing.
Engineer's thesis, California Institute of Technology.
http://resolver.caltech.edu/CaltechETD:etd-12032008-140606
Davis, Thomas V.
(1948)
Design of a large water tunnel.
Engineer's thesis, California Institute of Technology.
http://resolver.caltech.edu/CaltechETD:etd-12222008-143224
Nelson, Conrad N.
(1948)
Repeated loads above the proportional limit on 24-ST aluminum alloy.
Engineer's thesis, California Institute of Technology.
http://resolver.caltech.edu/CaltechETD:etd-12192008-105659
Rao, Chintakindi V. Joga.
(1948)
Repeated loads above the proportional limit on 24st aluminum alloy.
Engineer's thesis, California Institute of Technology.
http://resolver.caltech.edu/CaltechETD:etd-12162008-133111
Bull, Edward G.
(1947)
Repeated loads above the proportional limit on 24ST aluminum alloy.
Engineer's thesis, California Institute of Technology.
http://resolver.caltech.edu/CaltechETD:etd-12032008-093401
Durup, Paul C.
(1947)
Lateral stability of thin tapered struts.
Engineer's thesis, California Institute of Technology.
http://resolver.caltech.edu/CaltechETD:etd-12032008-152413
Pollock, A. D.
(1947)
A study of methods to increase the lift of supersonic airfoils at low speeds.
Engineer's thesis, California Institute of Technology.
http://resolver.caltech.edu/CaltechETD:etd-12082008-083805
Reiserer, R. L.
(1947)
Design and test of a rocket motor expansion joint.
Engineer's thesis, California Institute of Technology.
http://resolver.caltech.edu/CaltechETD:etd-12102008-090658
Sanders, Lewis Ben
(1947)
An investigation of inspection criteria for countersunk rivets.
Engineer's thesis, California Institute of Technology.
http://resolver.caltech.edu/CaltechETD:etd-12082008-091447
Soli, Orlan A.
(1947)
A study of the effects of rapidly applied loads and repeated loads on countersunk riveted joints.
Engineer's thesis, California Institute of Technology.
http://resolver.caltech.edu/CaltechETD:etd-12192008-111017
Kleiss, N. J.
(1946)
Some studies of expansion rings in rocket motors.
Engineer's thesis, California Institute of Technology.
http://resolver.caltech.edu/CaltechETD:etd-12242008-094536
Hege, Jeremiah C. and Goebel, Thomas Parker
(1945)
An experimental investigation of the effect of lip on the column strength of rolled sheet zee and angle sections.
Master's thesis, California Institute of Technology.
http://resolver.caltech.edu/CaltechTHESIS:05242011-153838445
Dixon, Howard Henry
(1944)
Investigation of design criteria of stiffened wood curved panels.
Engineer's thesis, California Institute of Technology.
http://resolver.caltech.edu/CaltechETD:etd-11242008-145312
Jackson, William G. and Ours, S. R.
(1944)
An investigation of the effects of weight geometry and time in repeated tension impact testing.
Engineer's thesis, California Institute of Technology.
http://resolver.caltech.edu/CaltechETD:etd-11252008-093713
Hanger, W. M.
(1943)
A photoelastic investigation of the effect of elliptical and modified cutouts in flat panels subjected to combined bending and shear.
Engineer's thesis, California Institute of Technology.
http://resolver.caltech.edu/CaltechETD:etd-11182008-133221
Lee, Edwin Samuel
(1943)
A correlation of repeated tension impact tests with other tension tests of 17ST duralumin.
Engineer's thesis, California Institute of Technology.
http://resolver.caltech.edu/CaltechETD:etd-12032008-153139
Sweeney, William Edward
(1943)
Investigation of design criteria of stiffened wooden panels.
Engineer's thesis, California Institute of Technology.
http://resolver.caltech.edu/CaltechETD:etd-12242008-113646
Gibbons, R. M. and Dill, Douglas
(1942)
A photoelastic investigation of the effect of elliptical and modified cutouts in flat panels subjected to combined bending and shear.
Engineer's thesis, California Institute of Technology.
http://resolver.caltech.edu/CaltechTHESIS:08242010-095944937
Olsen, Carl B. and Brown, Sheldon W.
(1942)
A study of the effects of repeated tension impact loads upon certain metals used in aircraft construction.
Engineer's thesis, California Institute of Technology.
http://resolver.caltech.edu/CaltechETD:etd-11072008-100137
Hollister, W. W.
(1941)
A photoelastic investigation of the effect of cutouts in panels subject to shear and bending.
Engineer's thesis, California Institute of Technology.
http://resolver.caltech.edu/CaltechETD:etd-11172008-105645
Dunn, Louis G.
(1940)
An investigation of sheet-stiffener panels subjected to compression loads with particular reference to torsionally weak stiffeners.
Dissertation (Ph.D.), California Institute of Technology.
http://resolver.caltech.edu/CaltechETD:etd-04202004-154649
Nagamatsu, Henry T.
(1940)
Experimental investigation of ultimate loads carried by flat, unstiffened panels under combined shear and compression.
Master's thesis, California Institute of Technology.
http://resolver.caltech.edu/CaltechETD:etd-11142008-140614
Beardsley, George Francis and Coates, Leonidas Dixon
(1939)
A study of the effect of repeated tension impact loads upon certain metals used in aircraft construction.
Master's thesis, California Institute of Technology.
http://resolver.caltech.edu/CaltechETD:etd-01102006-132339
Fan, H. T.
(1939)
A study of "shear lag" phenomenon in a stiffened flat panel by photoelastic methods.
Master's thesis, California Institute of Technology.
http://resolver.caltech.edu/CaltechETD:etd-12282005-161537
Kanemitsu, Sunao
(1939)
Axial compression test of thin circular cylinders. A. Length effect. B. Visual study of buckling.
Master's thesis, California Institute of Technology.
http://resolver.caltech.edu/CaltechETD:etd-12052005-105325
Tsubota, George Yoshio
(1939)
Experimental investigation of ultimate loads carried by flat, unstiffened panels under combined shear and compression.
Master's thesis, California Institute of Technology.
http://resolver.caltech.edu/CaltechETD:etd-12222005-104133
Bell, W. N.
(1938)
A photoelastic investigation of the distribution of shearing stresses in a stiffened flat panel.
Master's thesis, California Institute of Technology.
http://resolver.caltech.edu/CaltechETD:etd-01102006-131047
Butterworth, Wesley T.
(1938)
Experimental investigation of ultimate loads carried by flat, unstiffened panels under combined shear and compression.
Master's thesis, California Institute of Technology.
http://resolver.caltech.edu/CaltechETD:etd-12282005-095455
Dunn, Louis G.
(1938)
An experimental investigation of the stresses in extruded sections commonly used in aircraft construction.
Master's thesis, California Institute of Technology.
http://resolver.caltech.edu/CaltechETD:etd-06242004-092300
Mechling, Wallace B.
(1938)
An evaluation of the tension impact test by correlation with the physical properties of aluminum alloys.
Master's thesis, California Institute of Technology.
http://resolver.caltech.edu/CaltechETD:etd-07192007-104706
Mellinger, George R.
(1938)
Shear transfer of load from main beams to intermediate corrugations in metal sheet covered box beams.
Master's thesis, California Institute of Technology.
http://resolver.caltech.edu/CaltechETD:etd-01262006-140318
Putt, Donald L.
(1938)
Experimental investigation of the thickness of the boundary layer and the location of the transitional region along a wing section.
Master's thesis, California Institute of Technology.
http://resolver.caltech.edu/CaltechETD:etd-01092006-152711
Allardt, F. H.
(1937)
The brinelling of small ball bearings.
Master's thesis, California Institute of Technology.
http://resolver.caltech.edu/CaltechETD:etd-10132005-103946
Moore, Charles Kenneth
(1937)
Age hardening of heat treated aluminum alloy. An investigation of the fluctuation of hardness with time of ageing of heat treated aluminum alloy sheet.
Master's thesis, California Institute of Technology.
http://resolver.caltech.edu/CaltechETD:etd-03212005-103521
Murphy, J. N. and Smith, Joe Nelson
(1937)
Investigation of extended bulb angle sections under compression.
Master's thesis, California Institute of Technology.
http://resolver.caltech.edu/CaltechETD:etd-04252008-093950
Nollan, John Lloyd
(1937)
Age hardening of heat treated aluminum alloy. An investigation of the fluctuation of hardness with time of ageing of heat treated aluminum alloy sheet.
Master's thesis, California Institute of Technology.
http://resolver.caltech.edu/CaltechETD:etd-03212005-133656
Howland, W. Lavern
(1936)
Effect of rivet spacing on stiffened thin sheet under compression.
Master's thesis, California Institute of Technology.
http://resolver.caltech.edu/CaltechETD:etd-07182007-093403
Lovett, B. B. C.
(1936)
Transfer of stress from main beams to intermediate stiffeners in metal sheet covered box beams.
Master's thesis, California Institute of Technology.
http://resolver.caltech.edu/CaltechETD:etd-01272006-091759
Beakley, Wallace M.
(1935)
Investigation of duralumin channel section strut under compression.
Master's thesis, California Institute of Technology.
http://resolver.caltech.edu/CaltechETD:etd-12222005-115855
Kitsuda, K.
(1935)
Investigation of stress distribution on thin metal sheet with holes.
Engineer's thesis, California Institute of Technology.
http://resolver.caltech.edu/CaltechETD:etd-03112005-134957
Parr, Warren S.
(1935)
Investigation of duralumin channel section strut under compression.
Master's thesis, California Institute of Technology.
http://resolver.caltech.edu/CaltechETD:etd-12212005-134449
Magden, John L.
(1934)
A preliminary investigation of rivets and riveted joints in metal airplane construction.
Master's thesis, California Institute of Technology.
http://resolver.caltech.edu/CaltechETD:etd-07172007-081411
Vosseller, A. B.
(1934)
Investigation of relation between Euler and flat plate buckling of "L" section struts.
Master's thesis, California Institute of Technology.
http://resolver.caltech.edu/CaltechETD:etd-04242008-084758
This list was generated on Tue Jun 18 15:31:40 2013 PDT.
