CaltechTHESIS
  A Caltech Library Service

Browse by Committee Member

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Degree Date (Year Only) | Authors | No Grouping
Jump to: 1947 | 1945 | 1944 | 1943 | 1940 | 1939 | 1938 | 1936 | 1935 | 1933 | 1932
Number of items: 14.

1947

Hayes, Wallace D. (1947) Linearized supersonic flow. Dissertation (Ph.D.), California Institute of Technology. http://resolver.caltech.edu/CaltechETD:etd-04132007-131650

1945

Chambers, L. S. (1945) An investigation of the effects of angle of attack and airfoil model size on the occurrence of shock waves in a two dimensional wind tunnel. Engineer's thesis, California Institute of Technology. http://resolver.caltech.edu/CaltechETD:etd-12032008-153938

1944

Jackson, William G. and Ours, S. R. (1944) An investigation of the effects of weight geometry and time in repeated tension impact testing. Engineer's thesis, California Institute of Technology. http://resolver.caltech.edu/CaltechETD:etd-11252008-093713

1943

Lee, Edwin Samuel (1943) A correlation of repeated tension impact tests with other tension tests of 17ST duralumin. Engineer's thesis, California Institute of Technology. http://resolver.caltech.edu/CaltechETD:etd-12032008-153139

1940

Fischer, Harold S. (1940) An application of matrix methods to wing theory. Master's thesis, California Institute of Technology. http://resolver.caltech.edu/CaltechETD:etd-11142008-094640

Fredrick, J. Louis (1940) The failure of thin-walled semi-elliptical cylinders under torsion. Master's thesis, California Institute of Technology. http://resolver.caltech.edu/CaltechETD:etd-11132008-142412

Gentner, William Ellis and Biglow, James Otis (1940) A study of the effect of repeated tension impact loads upon certain metals used in aircraft construction. Master's thesis, California Institute of Technology. http://resolver.caltech.edu/CaltechTHESIS:04252011-080056433

1939

Wang, Tsun Kuei (1939) A theoretical investigation of the distribution of maximum shearing stresses in a stiffened flat panel. Master's thesis, California Institute of Technology. http://resolver.caltech.edu/CaltechETD:etd-04142008-083306

1938

Putt, Donald L. (1938) Experimental investigation of the thickness of the boundary layer and the location of the transitional region along a wing section. Master's thesis, California Institute of Technology. http://resolver.caltech.edu/CaltechETD:etd-01092006-152711

1936

Childers, M. C. (1936) Stresses in metal beams with flat sheet webs of medium thickness. Master's thesis, California Institute of Technology. http://resolver.caltech.edu/CaltechETD:etd-04242008-111115

1935

Lipp, James E. (1935) Strength of thin walled cylinders subjected to combined compression and torsion. Dissertation (Ph.D.), California Institute of Technology. http://resolver.caltech.edu/CaltechETD:etd-01192006-141156

Mills, Roscoe H. (1935) The boundary layer for some axial symmetric flows. Dissertation (Ph.D.), California Institute of Technology. http://resolver.caltech.edu/CaltechETD:etd-05022008-122728

1933

Wattendorf, Frank Leslie (1933) A study of the effect of curvature on fully developed turbulent flow. Dissertation (Ph.D.), California Institute of Technology. http://resolver.caltech.edu/CaltechETD:etd-08182006-154158

1932

Biot, Maurice A. (1932) Transient oscillations in elastic systems. General theorems. Vibrations of buildings during earthquake. Critical torsional vibrations of accelerated rotating shafts. Dissertation (Ph.D.), California Institute of Technology. http://resolver.caltech.edu/CaltechETD:etd-11252003-113841

This list was generated on Fri Oct 31 02:01:55 2014 PDT.