Number of items: 13.
C
Chambers, L. S.
(1945)
An investigation of the effects of angle of attack and airfoil model size on the occurrence of shock waves in a two dimensional wind tunnel.
Engineer's thesis, California Institute of Technology.
http://resolver.caltech.edu/CaltechETD:etd-12032008-153938
Childers, M. C.
(1936)
Stresses in metal beams with flat sheet webs of medium thickness.
Master's thesis, California Institute of Technology.
http://resolver.caltech.edu/CaltechETD:etd-04242008-111115
F
Fischer, Harold S.
(1940)
An application of matrix methods to wing theory.
Master's thesis, California Institute of Technology.
http://resolver.caltech.edu/CaltechETD:etd-11142008-094640
Fredrick, J. Louis
(1940)
The failure of thin-walled semi-elliptical cylinders under torsion.
Master's thesis, California Institute of Technology.
http://resolver.caltech.edu/CaltechETD:etd-11132008-142412
G
Gentner, William Ellis and Biglow, James Otis
(1940)
A study of the effect of repeated tension impact loads upon certain metals used in aircraft construction.
Master's thesis, California Institute of Technology.
http://resolver.caltech.edu/CaltechTHESIS:04252011-080056433
H
Hayes, Wallace D.
(1947)
Linearized supersonic flow.
Dissertation (Ph.D.), California Institute of Technology.
http://resolver.caltech.edu/CaltechETD:etd-04132007-131650
J
Jackson, William G. and Ours, S. R.
(1944)
An investigation of the effects of weight geometry and time in repeated tension impact testing.
Engineer's thesis, California Institute of Technology.
http://resolver.caltech.edu/CaltechETD:etd-11252008-093713
L
Lee, Edwin Samuel
(1943)
A correlation of repeated tension impact tests with other tension tests of 17ST duralumin.
Engineer's thesis, California Institute of Technology.
http://resolver.caltech.edu/CaltechETD:etd-12032008-153139
Lipp, James E.
(1935)
Strength of thin walled cylinders subjected to combined compression and torsion.
Dissertation (Ph.D.), California Institute of Technology.
http://resolver.caltech.edu/CaltechETD:etd-01192006-141156
M
Mills, Roscoe H.
(1935)
The boundary layer for some axial symmetric flows.
Dissertation (Ph.D.), California Institute of Technology.
http://resolver.caltech.edu/CaltechETD:etd-05022008-122728
P
Putt, Donald L.
(1938)
Experimental investigation of the thickness of the boundary layer and the location of the transitional region along a wing section.
Master's thesis, California Institute of Technology.
http://resolver.caltech.edu/CaltechETD:etd-01092006-152711
W
Wang, Tsun Kuei
(1939)
A theoretical investigation of the distribution of maximum shearing stresses in a stiffened flat panel.
Master's thesis, California Institute of Technology.
http://resolver.caltech.edu/CaltechETD:etd-04142008-083306
Wattendorf, Frank Leslie
(1933)
A study of the effect of curvature on fully developed turbulent flow.
Dissertation (Ph.D.), California Institute of Technology.
http://resolver.caltech.edu/CaltechETD:etd-08182006-154158
This list was generated on Sat May 18 02:01:51 2013 PDT.
