Number of items: 13.
Hayes, Wallace D.
(1947)
Linearized supersonic flow.
Dissertation (Ph.D.), California Institute of Technology.
http://resolver.caltech.edu/CaltechETD:etd-04132007-131650
Chambers, L. S.
(1945)
An investigation of the effects of angle of attack and airfoil model size on the occurrence of shock waves in a two dimensional wind tunnel.
Engineer's thesis, California Institute of Technology.
http://resolver.caltech.edu/CaltechETD:etd-12032008-153938
Jackson, William G. and Ours, S. R.
(1944)
An investigation of the effects of weight geometry and time in repeated tension impact testing.
Engineer's thesis, California Institute of Technology.
http://resolver.caltech.edu/CaltechETD:etd-11252008-093713
Lee, Edwin Samuel
(1943)
A correlation of repeated tension impact tests with other tension tests of 17ST duralumin.
Engineer's thesis, California Institute of Technology.
http://resolver.caltech.edu/CaltechETD:etd-12032008-153139
Fischer, Harold S.
(1940)
An application of matrix methods to wing theory.
Master's thesis, California Institute of Technology.
http://resolver.caltech.edu/CaltechETD:etd-11142008-094640
Fredrick, J. Louis
(1940)
The failure of thin-walled semi-elliptical cylinders under torsion.
Master's thesis, California Institute of Technology.
http://resolver.caltech.edu/CaltechETD:etd-11132008-142412
Gentner, William Ellis and Biglow, James Otis
(1940)
A study of the effect of repeated tension impact loads upon certain metals used in aircraft construction.
Master's thesis, California Institute of Technology.
http://resolver.caltech.edu/CaltechTHESIS:04252011-080056433
Wang, Tsun Kuei
(1939)
A theoretical investigation of the distribution of maximum shearing stresses in a stiffened flat panel.
Master's thesis, California Institute of Technology.
http://resolver.caltech.edu/CaltechETD:etd-04142008-083306
Putt, Donald L.
(1938)
Experimental investigation of the thickness of the boundary layer and the location of the transitional region along a wing section.
Master's thesis, California Institute of Technology.
http://resolver.caltech.edu/CaltechETD:etd-01092006-152711
Childers, M. C.
(1936)
Stresses in metal beams with flat sheet webs of medium thickness.
Master's thesis, California Institute of Technology.
http://resolver.caltech.edu/CaltechETD:etd-04242008-111115
Lipp, James E.
(1935)
Strength of thin walled cylinders subjected to combined compression and torsion.
Dissertation (Ph.D.), California Institute of Technology.
http://resolver.caltech.edu/CaltechETD:etd-01192006-141156
Mills, Roscoe H.
(1935)
The boundary layer for some axial symmetric flows.
Dissertation (Ph.D.), California Institute of Technology.
http://resolver.caltech.edu/CaltechETD:etd-05022008-122728
Wattendorf, Frank Leslie
(1933)
A study of the effect of curvature on fully developed turbulent flow.
Dissertation (Ph.D.), California Institute of Technology.
http://resolver.caltech.edu/CaltechETD:etd-08182006-154158
This list was generated on Wed May 22 02:02:03 2013 PDT.
