Browse by Advisor

1967

Chen, Jay Chung (1967) Extreme value analysis of fluctuating air loads acting on a cylinder. Engineer's thesis, California Institute of Technology. doi:10.7907/37E4-WS51. https://resolver.caltech.edu/CaltechETD:etd-12282005-134521

1966

Lee, Jen-shih (1966) Application of Finite Elastic Theory to the Deformation of Cylindrical Tubes. Dissertation (Ph.D.), California Institute of Technology. doi:10.7907/HM2E-AX28. https://resolver.caltech.edu/CaltechETD:etd-12052005-150440

Olson, Mervyn Daniel (1966) Supersonic Flutter of Circular Cylindrical Shells. Dissertation (Ph.D.), California Institute of Technology. doi:10.7907/32AP-C463. https://resolver.caltech.edu/CaltechETD:etd-12022005-075701

Tong, Pin (1966) Liquid Sloshing in an Elastic Container. Dissertation (Ph.D.), California Institute of Technology. doi:10.7907/WYZD-Q384. https://resolver.caltech.edu/CaltechTHESIS:08202010-092311496

1965

Spitzer, Robert Edward (1965) Measurements of Unsteady Pressures and Wake Fluctuations for Flow Over a Cylinder at Supercritical Reynolds Number. Engineer's thesis, California Institute of Technology. doi:10.7907/WT4K-6337. https://resolver.caltech.edu/CaltechETD:etd-01222004-093919

1963

Anderson, William Judson (1963) Studies in Panel Flutter at Higher Mach Numbers: I. Flat and Slightly Curved Panels at Mach number 2.81. II. Cylindrical Shells with Boundary Layer. Dissertation (Ph.D.), California Institute of Technology. doi:10.7907/E3ZX-JG81. https://resolver.caltech.edu/CaltechETD:etd-12152005-081824

Blackiston, Harry Spencer (1963) Tip Effects on Fluctuating Lift and Drag Forces Acting on a Circular Cylinder Perpendicular to an Air Flow. Engineer's thesis, California Institute of Technology. doi:10.7907/TV46-TR33. https://resolver.caltech.edu/CaltechETD:etd-12072005-135116

Schmidt, Louis Vincent (1963) Measurements of Fluctuating Air Loads on a Circular Cylinder. Dissertation (Ph.D.), California Institute of Technology. doi:10.7907/8714-PJ73. https://resolver.caltech.edu/CaltechETD:etd-06102008-110237

1962

Cummings, Benjamin Edgar (1962) Some Nonlinear Vibration and Response Problems of Cylindrical Panels and Shells. Dissertation (Ph.D.), California Institute of Technology. doi:10.7907/AXC2-6P94. https://resolver.caltech.edu/CaltechETD:etd-12222005-115144

Watts, George Arthur (1962) Vibration and Damping of Thin-Walled Cylinders. Engineer's thesis, California Institute of Technology. doi:10.7907/XPER-7Q77. https://resolver.caltech.edu/CaltechETD:etd-12072005-132350

1961

Lock, Malcolm Harvey (1961) A Study of Two-Dimensional Panel Flutter. Dissertation (Ph.D.), California Institute of Technology. doi:10.7907/NZ2V-H267. https://resolver.caltech.edu/CaltechETD:etd-12142005-124410

Stearman, Ronald Oran (1961) Part I. The Stability of a Membrane in a Subsonic Flow. Part II. The Stability of a Grid of Panels in a Supersonic Flow. Dissertation (Ph.D.), California Institute of Technology. doi:10.7907/TE64-4652. https://resolver.caltech.edu/CaltechETD:etd-12212005-160627

1960

Fleming, Edward Richard (1960) Non-linear Flutter. Dissertation (Ph.D.), California Institute of Technology. doi:10.7907/CSNK-SA02. https://resolver.caltech.edu/CaltechETD:etd-12082005-133349

1959

Weyers, Paul Frederik Robert (1959) The Vibration and Acoustic Radiation of Thin-Walled Cylinders Caused by Internal Turbulent Flow. Dissertation (Ph.D.), California Institute of Technology. doi:10.7907/QTM4-9Z19. https://resolver.caltech.edu/CaltechETD:etd-02062006-134627

1957

Cummings, Benjamin Edgar (1957) Supersonic Flutter of a Plate Containing Many Bays in the Spanwise Direction. Engineer's thesis, California Institute of Technology. doi:10.7907/M4GA-0651. https://resolver.caltech.edu/CaltechETD:etd-07082004-143419

1956

Eisley, Joe Griffin (1956) Panel Flutter in Supersonic Flow. Dissertation (Ph.D.), California Institute of Technology. doi:10.7907/ZF04-TK14. https://resolver.caltech.edu/CaltechETD:etd-03222004-163442

1954

Kaplan, Abner (1954) Finite Deflections and Buckling of Slightly Curved Beams and Shallow Spherical Shells under Lateral Loads. Part I. Buckling of Low Arches or Curved Beams of Small Curvature. Part II. A Nonlinear Theory of Bending and Buckling of Thin Elastic Shallow Spherical Shells. Dissertation (Ph.D.), California Institute of Technology. doi:10.7907/Q1HV-T474. https://resolver.caltech.edu/CaltechETD:etd-12032003-110343

1952

Thatcher, Roland Churchill (1952) Short Time Compressive Creep in 75S-T6 and 25S-T6 Aluminum Alloy Short Columns. Engineer's thesis, California Institute of Technology. doi:10.7907/DFBM-7A50. https://resolver.caltech.edu/CaltechETD:etd-03302009-083614

1951

Dankworth, Edwin George (1951) An Investigation of the Effects of a Sharp Velocity Gradient of the Flexure-Torsion Flutter Speed of an Airfoil. Engineer's thesis, California Institute of Technology. doi:10.7907/QBG8-G786. https://resolver.caltech.edu/CaltechETD:etd-03132009-130943

Dixon, Howard Henry (1951) Stresses and Deflections of Unswept and Swept Thin-Walled Beams. Dissertation (Ph.D.), California Institute of Technology. doi:10.7907/7D5X-ZN05. https://resolver.caltech.edu/CaltechETD:etd-03232009-093729

Walker, Donald Petrilla (1951) An Experimental Investigations of the Oscillations of an Airfoil Near a Sharp Velocity Gradient. Engineer's thesis, California Institute of Technology. doi:10.7907/5PMF-4R60. https://resolver.caltech.edu/CaltechETD:etd-03232009-090843

1950

DeGroff, Harold Miller (1950) Aerodynamic Forces on a Propeller in Non-Stationary Motion. Dissertation (Ph.D.), California Institute of Technology. doi:10.7907/DYT6-1W82. https://resolver.caltech.edu/CaltechETD:etd-02272009-083100

Kane, John Clarence (1950) Correlation of Fatigue Data to Determine Stress Concentration Factors in 76s-T Aluminum Alloys. Engineer's thesis, California Institute of Technology. doi:10.7907/FHCF-VX77. https://resolver.caltech.edu/CaltechETD:etd-02092009-081322

Wechsler, Joseph Wolff (1950) An Investigation of the Application of the Rayleigh-Ritz Method to the Deflection of a Small Aspect Ratio Swept Plate of Uniform Thickness. Engineer's thesis, California Institute of Technology. doi:10.7907/JSWQ-0P95. https://resolver.caltech.edu/CaltechETD:etd-03132009-153457

Williams, Max Lea (1950) The Plate Problem for a Cantilever Sector of Uniform Thickness. Dissertation (Ph.D.), California Institute of Technology. doi:10.7907/WFM9-RR55. https://resolver.caltech.edu/CaltechETD:etd-07202004-095445