Number of items: 12.
1962
King, Kenneth Robert
(1962)
Dynamic Shear Deformation in Zinc Crystals.
Dissertation (Ph.D.), California Institute of Technology.
doi:10.7907/J5Q8-5C31.
https://resolver.caltech.edu/CaltechTHESIS:08012011-141442374
1958
Russell, Thomas Lee
(1958)
The Effect of Grain Size on the Yielding Behavior of Very Low Carbon Steel.
Dissertation (Ph.D.), California Institute of Technology.
doi:10.7907/77XQ-5M30.
https://resolver.caltech.edu/CaltechETD:etd-01232006-153919
1953
Johnson, James Edgar
(1953)
The Dynamic Stress-Strain Relation of Annealed 2S Aluminum Under Compression Impact.
Dissertation (Ph.D.), California Institute of Technology.
doi:10.7907/3CM0-PH78.
https://resolver.caltech.edu/CaltechETD:etd-09242002-112143
1952
Thatcher, Roland Churchill
(1952)
Short Time Compressive Creep in 75S-T6 and 25S-T6 Aluminum Alloy Short Columns.
Engineer's thesis, California Institute of Technology.
doi:10.7907/DFBM-7A50.
https://resolver.caltech.edu/CaltechETD:etd-03302009-083614
Vreeland, Thad
(1952)
A Study of the Initiation of Yielding in Mild Steel.
Dissertation (Ph.D.), California Institute of Technology.
doi:10.7907/7ZK4-D555.
https://resolver.caltech.edu/CaltechETD:etd-10222002-101824
1949
Hardy, Donald James
(1949)
The Effect of Surface Roughness upon 25 ST Aluminum Alloy Subjected to Repeated Tensile Stresses Above the Proportional Limit.
Engineer's thesis, California Institute of Technology.
doi:10.7907/Q6A7-1796.
https://resolver.caltech.edu/CaltechETD:etd-01272009-083535
Ringness, William Merritt
(1949)
The Effect of Surface Roughness upon 25 ST Aluminum Alloy Subjected to Repeated Tensile Stresses Above the Proportional Limit.
Engineer's thesis, California Institute of Technology.
doi:10.7907/WH57-T868.
https://resolver.caltech.edu/CaltechETD:etd-02022009-093120
Wood, David Shotwell
(1949)
The Influence of Stress and Temperature upon the Time to Initiate Plastic Deformation in an Annealed Low Carbon Steel.
Dissertation (Ph.D.), California Institute of Technology.
doi:10.7907/5355-1Z24.
https://resolver.caltech.edu/CaltechETD:etd-10222002-111754
1948
Paul, Charles Craig
(1948)
The Design of a Multipurpose Chair for Children.
Engineer's thesis, California Institute of Technology.
doi:10.7907/hrn6-ym94.
https://resolver.caltech.edu/CaltechTHESIS:03062024-191723786
1941
Griffis, LeVan
(1941)
The Influence of the Rate of Deformation on the Strength of Materials in Tension.
Dissertation (Ph.D.), California Institute of Technology.
doi:10.7907/p0k1-8035.
https://resolver.caltech.edu/CaltechTHESIS:02212025-193949654
Wetmore, William Owen
(1941)
An Investigation of Some Silver Alloy Steels.
Dissertation (Ph.D.), California Institute of Technology.
doi:10.7907/v2ch-sj29.
https://resolver.caltech.edu/CaltechTHESIS:02082025-233859174
1936
Freeman, Robert Braman
(1936)
The Relative Sliding Wear Resistance of Some Hard Alloys.
Dissertation (Ph.D.), California Institute of Technology.
doi:10.7907/1htx-tq50.
https://resolver.caltech.edu/CaltechTHESIS:10112024-145918852
This list was generated on Mon Feb 24 22:03:55 2025 UTC.
