Number of items: 11.
F
Freeman, Robert Braman
(1936)
The Relative Sliding Wear Resistance of Some Hard Alloys.
Dissertation (Ph.D.), California Institute of Technology.
doi:10.7907/1htx-tq50.
https://resolver.caltech.edu/CaltechTHESIS:10112024-145918852
H
Hardy, Donald James
(1949)
The Effect of Surface Roughness upon 25 ST Aluminum Alloy Subjected to Repeated Tensile Stresses Above the Proportional Limit.
Engineer's thesis, California Institute of Technology.
doi:10.7907/Q6A7-1796.
https://resolver.caltech.edu/CaltechETD:etd-01272009-083535
J
Johnson, James Edgar
(1953)
The Dynamic Stress-Strain Relation of Annealed 2S Aluminum Under Compression Impact.
Dissertation (Ph.D.), California Institute of Technology.
doi:10.7907/3CM0-PH78.
https://resolver.caltech.edu/CaltechETD:etd-09242002-112143
K
King, Kenneth Robert
(1962)
Dynamic Shear Deformation in Zinc Crystals.
Dissertation (Ph.D.), California Institute of Technology.
doi:10.7907/J5Q8-5C31.
https://resolver.caltech.edu/CaltechTHESIS:08012011-141442374
P
Paul, Charles Craig
(1948)
The Design of a Multipurpose Chair for Children.
Engineer's thesis, California Institute of Technology.
doi:10.7907/hrn6-ym94.
https://resolver.caltech.edu/CaltechTHESIS:03062024-191723786
R
Russell, Thomas Lee
(1958)
The Effect of Grain Size on the Yielding Behavior of Very Low Carbon Steel.
Dissertation (Ph.D.), California Institute of Technology.
doi:10.7907/77XQ-5M30.
https://resolver.caltech.edu/CaltechETD:etd-01232006-153919
Ringness, William Merritt
(1949)
The Effect of Surface Roughness upon 25 ST Aluminum Alloy Subjected to Repeated Tensile Stresses Above the Proportional Limit.
Engineer's thesis, California Institute of Technology.
doi:10.7907/WH57-T868.
https://resolver.caltech.edu/CaltechETD:etd-02022009-093120
T
Thatcher, Roland Churchill
(1952)
Short Time Compressive Creep in 75S-T6 and 25S-T6 Aluminum Alloy Short Columns.
Engineer's thesis, California Institute of Technology.
doi:10.7907/DFBM-7A50.
https://resolver.caltech.edu/CaltechETD:etd-03302009-083614
V
Vreeland, Thad
(1952)
A Study of the Initiation of Yielding in Mild Steel.
Dissertation (Ph.D.), California Institute of Technology.
doi:10.7907/7ZK4-D555.
https://resolver.caltech.edu/CaltechETD:etd-10222002-101824
W
Wood, David Shotwell
(1949)
The Influence of Stress and Temperature upon the Time to Initiate Plastic Deformation in an Annealed Low Carbon Steel.
Dissertation (Ph.D.), California Institute of Technology.
doi:10.7907/5355-1Z24.
https://resolver.caltech.edu/CaltechETD:etd-10222002-111754
Wetmore, William Owen
(1941)
An Investigation of Some Silver Alloy Steels.
Dissertation (Ph.D.), California Institute of Technology.
doi:10.7907/v2ch-sj29.
https://resolver.caltech.edu/CaltechTHESIS:02082025-233859174
This list was generated on Tue Feb 18 11:30:50 2025 UTC.
