Number of items: 18.
1967
Greenman, William Franklin
(1967)
Dislocation mobility in pure copper single crystals.
Dissertation (Ph.D.), California Institute of Technology.
doi:10.7907/072F-RC63.
https://resolver.caltech.edu/CaltechETD:etd-09192002-153519
Pope, David Peter
(1967)
The mobility of edge dislocations in the basal slip system of zinc.
Dissertation (Ph.D.), California Institute of Technology.
doi:10.7907/1XNZ-CE29.
https://resolver.caltech.edu/CaltechETD:etd-10042002-081427
1965
Adams, Kenneth Hoyt
(1965)
Dislocation Mobility and Density in Zinc Single Crystals.
Dissertation (Ph.D.), California Institute of Technology.
doi:10.7907/SYCE-8B03.
https://resolver.caltech.edu/CaltechETD:etd-09102002-095733
1956
Zima, Gordon Everett
(1956)
Some high temperature oxidation characteristics of nickel with chromium additions.
Dissertation (Ph.D.), California Institute of Technology.
doi:10.7907/8MC2-WR66.
https://resolver.caltech.edu/CaltechETD:etd-05252004-103520
1955
Wright, William Vale
(1955)
Precipitation embrittlement studies in vacuum melted iron-chromium alloys.
Dissertation (Ph.D.), California Institute of Technology.
doi:10.7907/007T-MG19.
https://resolver.caltech.edu/CaltechETD:etd-01272004-092755
1953
Robinson, Winthrop P.
(1953)
The effect of temperature cycling on the physical properties of 75S-T6 aluminum alloy sheet metal.
Engineer's thesis, California Institute of Technology.
doi:10.7907/GEHN-V977.
https://resolver.caltech.edu/CaltechETD:etd-05122003-121943
1952
Kauffman, Ralph J.
(1952)
An Investigation of Creep in Light Metal Alloys.
Engineer's thesis, California Institute of Technology.
doi:10.7907/HB4M-3P19.
https://resolver.caltech.edu/CaltechETD:etd-03302009-061536
Thatcher, Roland Churchill
(1952)
Short Time Compressive Creep in 75S-T6 and 25S-T6 Aluminum Alloy Short Columns.
Engineer's thesis, California Institute of Technology.
doi:10.7907/DFBM-7A50.
https://resolver.caltech.edu/CaltechETD:etd-03302009-083614
1949
Cooley, J. S.
(1949)
Reversed bending fatigue properties of 25 S-T, 75 S-T, and 76 S-T aluminum alloys.
Engineer's thesis, California Institute of Technology.
doi:10.7907/HNFP-NB63.
https://resolver.caltech.edu/CaltechETD:etd-01262009-110934
Hardy, Donald J.
(1949)
The effect of surface roughness upon 25 st aluminum alloy subjected to repeated tensile stresses above the proportional limit.
Engineer's thesis, California Institute of Technology.
doi:10.7907/Q6A7-1796.
https://resolver.caltech.edu/CaltechETD:etd-01272009-083535
McClintock, Frank A.
(1949)
A study of single and polycrystalline ingot iron under repeated stress.
Dissertation (Ph.D.), California Institute of Technology.
doi:10.7907/A49D-6315.
https://resolver.caltech.edu/CaltechETD:etd-03272007-130713
Ringness, William M.
(1949)
The effect of surface roughness upon 25 st aluminum alloy subjected to repeated tensile stresses above the proportional limit.
Engineer's thesis, California Institute of Technology.
doi:10.7907/WH57-T868.
https://resolver.caltech.edu/CaltechETD:etd-02022009-093120
1948
Nelson, Conrad N.
(1948)
Repeated loads above the proportional limit on 24-ST aluminum alloy.
Engineer's thesis, California Institute of Technology.
doi:10.7907/V6ZX-5G92.
https://resolver.caltech.edu/CaltechETD:etd-12192008-105659
Rao, Chintakindi V. Joga.
(1948)
Repeated loads above the proportional limit on 24st aluminum alloy.
Engineer's thesis, California Institute of Technology.
doi:10.7907/V8T5-YS83.
https://resolver.caltech.edu/CaltechETD:etd-12162008-133111
1947
Bull, Edward George and Mastin, Robert L.
(1947)
Repeated loads above the proportional limit on 24ST aluminum alloy.
Engineer's thesis, California Institute of Technology.
doi:10.7907/BN3E-8T35.
https://resolver.caltech.edu/CaltechETD:etd-12032008-093401
1944
Ours, S. R. and Jackson, William G.
(1944)
An investigation of the effects of weight geometry and time in repeated tension impact testing.
Engineer's thesis, California Institute of Technology.
doi:10.7907/G8NX-JD54.
https://resolver.caltech.edu/CaltechETD:etd-11252008-093713
1943
Lee, Edwin Samuel and Sterling, Cedric Warren
(1943)
A correlation of repeated tension impact tests with other tension tests of 17ST duralumin.
Engineer's thesis, California Institute of Technology.
doi:10.7907/VP8E-Q282.
https://resolver.caltech.edu/CaltechETD:etd-12032008-153139
1940
Gentner, William Ellis and Biglow, James Otis
(1940)
A study of the effect of repeated tension impact loads upon certain metals used in aircraft construction.
Master's thesis, California Institute of Technology.
doi:10.7907/93VQ-ED36.
https://resolver.caltech.edu/CaltechTHESIS:04252011-080056433
This list was generated on Tue May 17 01:32:14 2022 UTC.
