Jump to:
C |
F |
L |
M |
W |
YNumber of items: 9.
C
Childers, M. C.
(1936)
Stresses in metal beams with flat sheet webs of medium thickness.
Master's thesis, California Institute of Technology.
http://resolver.caltech.edu/CaltechETD:etd-04242008-111115
F
Ford, W. W.
(1949)
Design of a six component internal strain gage balance system.
Engineer's thesis, California Institute of Technology.
http://resolver.caltech.edu/CaltechETD:etd-01222009-132301
Fredrick, J. Louis
(1940)
The failure of thin-walled semi-elliptical cylinders under torsion.
Master's thesis, California Institute of Technology.
http://resolver.caltech.edu/CaltechETD:etd-11132008-142412
L
Lapin, Ellis
(1941)
The effect of gunfire on the longitudinal motion of an airplane.
Engineer's thesis, California Institute of Technology.
http://resolver.caltech.edu/CaltechETD:etd-11062008-151722
Lipp, James E.
(1935)
Strength of thin walled cylinders subjected to combined compression and torsion.
Dissertation (Ph.D.), California Institute of Technology.
http://resolver.caltech.edu/CaltechETD:etd-01192006-141156
M
Mills, Roscoe H.
(1935)
The boundary layer for some axial symmetric flows.
Dissertation (Ph.D.), California Institute of Technology.
http://resolver.caltech.edu/CaltechETD:etd-05022008-122728
W
Williams, Edgar P.
(1942)
Fuselage and nacelle effects on airplanes as determined by a statistical study of data from the GALCIT 10-foot tunnel.
Engineer's thesis, California Institute of Technology.
http://resolver.caltech.edu/CaltechETD:etd-01282009-104914
Wattendorf, Frank Leslie
(1933)
A study of the effect of curvature on fully developed turbulent flow.
Dissertation (Ph.D.), California Institute of Technology.
http://resolver.caltech.edu/CaltechETD:etd-08182006-154158
Y
Young, Bradley H.
(1937)
A two-parameter wind tunnel rigging system.
Master's thesis, California Institute of Technology.
http://resolver.caltech.edu/CaltechETD:etd-03242005-100937
This list was generated on Fri May 17 22:55:39 2013 PDT.
