CaltechTHESIS
  A Caltech Library Service

Browse by Committee Member

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Degree Date (Year Only) | Authors | No Grouping
Jump to: B | C | G | H | K | L | M | N | O | P | R | T | W | Z
Number of items: 16.

B

Bull, Edward George and Mastin, Robert L. (1947) Repeated loads above the proportional limit on 24ST aluminum alloy. Engineer's thesis, California Institute of Technology. http://resolver.caltech.edu/CaltechETD:etd-12032008-093401

C

Cooley, J. S. (1949) Reversed bending fatigue properties of 25 S-T, 75 S-T, and 76 S-T aluminum alloys. Engineer's thesis, California Institute of Technology. http://resolver.caltech.edu/CaltechETD:etd-01262009-110934

G

Greenman, William Franklin (1967) Dislocation mobility in pure copper single crystals. Dissertation (Ph.D.), California Institute of Technology. http://resolver.caltech.edu/CaltechETD:etd-09192002-153519

H

Hardy, Donald J. (1949) The effect of surface roughness upon 25 st aluminum alloy subjected to repeated tensile stresses above the proportional limit. Engineer's thesis, California Institute of Technology. http://resolver.caltech.edu/CaltechETD:etd-01272009-083535

K

Kauffman, Ralph J. (1952) An investigation of creep in light metal alloys. Engineer's thesis, California Institute of Technology. http://resolver.caltech.edu/CaltechETD:etd-03302009-061536

L

Lee, Edwin Samuel and Sterling, Cedric Warren (1943) A correlation of repeated tension impact tests with other tension tests of 17ST duralumin. Engineer's thesis, California Institute of Technology. http://resolver.caltech.edu/CaltechETD:etd-12032008-153139

M

McClintock, Frank A. (1949) A study of single and polycrystalline ingot iron under repeated stress. Dissertation (Ph.D.), California Institute of Technology. http://resolver.caltech.edu/CaltechETD:etd-03272007-130713

N

Nelson, Conrad N. (1948) Repeated loads above the proportional limit on 24-ST aluminum alloy. Engineer's thesis, California Institute of Technology. http://resolver.caltech.edu/CaltechETD:etd-12192008-105659

O

Ours, S. R. and Jackson, William G. (1944) An investigation of the effects of weight geometry and time in repeated tension impact testing. Engineer's thesis, California Institute of Technology. http://resolver.caltech.edu/CaltechETD:etd-11252008-093713

P

Pope, David Peter (1967) The mobility of edge dislocations in the basal slip system of zinc. Dissertation (Ph.D.), California Institute of Technology. http://resolver.caltech.edu/CaltechETD:etd-10042002-081427

R

Robinson, Winthrop P. (1953) The effect of temperature cycling on the physical properties of 75S-T6 aluminum alloy sheet metal. Engineer's thesis, California Institute of Technology. http://resolver.caltech.edu/CaltechETD:etd-05122003-121943

Ringness, William M. (1949) The effect of surface roughness upon 25 st aluminum alloy subjected to repeated tensile stresses above the proportional limit. Engineer's thesis, California Institute of Technology. http://resolver.caltech.edu/CaltechETD:etd-02022009-093120

Rao, Chintakindi V. Joga. (1948) Repeated loads above the proportional limit on 24st aluminum alloy. Engineer's thesis, California Institute of Technology. http://resolver.caltech.edu/CaltechETD:etd-12162008-133111

T

Thatcher, Roland C. (1952) Short time compressive creep in 75S-T6 and 25S-T6 aluminum alloy short columns. Engineer's thesis, California Institute of Technology. http://resolver.caltech.edu/CaltechETD:etd-03302009-083614

W

Wright, William Vale (1955) Precipitation embrittlement studies in vacuum melted iron-chromium alloys. Dissertation (Ph.D.), California Institute of Technology. http://resolver.caltech.edu/CaltechETD:etd-01272004-092755

Z

Zima, Gordon Everett (1956) Some high temperature oxidation characteristics of nickel with chromium additions. Dissertation (Ph.D.), California Institute of Technology. http://resolver.caltech.edu/CaltechETD:etd-05252004-103520

This list was generated on Tue Sep 19 02:00:42 2017 PDT.