CaltechTHESIS
  A Caltech Library Service

Browse by Advisor

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Degree Date (Year Only) | Authors | No Grouping
Number of items: 9.

King, Kenneth Robert (1962) Dynamic Shear Deformation in Zinc Crystals. Dissertation (Ph.D.), California Institute of Technology. doi:10.7907/J5Q8-5C31. https://resolver.caltech.edu/CaltechTHESIS:08012011-141442374

Russell, Thomas Lee (1958) The Effect of Grain Size on the Yielding Behavior of Very Low Carbon Steel. Dissertation (Ph.D.), California Institute of Technology. doi:10.7907/77XQ-5M30. https://resolver.caltech.edu/CaltechETD:etd-01232006-153919

Johnson, James Edgar (1953) The Dynamic Stress-Strain Relation of Annealed 2S Aluminum Under Compression Impact. Dissertation (Ph.D.), California Institute of Technology. doi:10.7907/3CM0-PH78. https://resolver.caltech.edu/CaltechETD:etd-09242002-112143

Thatcher, Roland Churchill (1952) Short Time Compressive Creep in 75S-T6 and 25S-T6 Aluminum Alloy Short Columns. Engineer's thesis, California Institute of Technology. doi:10.7907/DFBM-7A50. https://resolver.caltech.edu/CaltechETD:etd-03302009-083614

Vreeland, Thad (1952) A Study of the Initiation of Yielding in Mild Steel. Dissertation (Ph.D.), California Institute of Technology. doi:10.7907/7ZK4-D555. https://resolver.caltech.edu/CaltechETD:etd-10222002-101824

Hardy, Donald James (1949) The Effect of Surface Roughness upon 25 ST Aluminum Alloy Subjected to Repeated Tensile Stresses Above the Proportional Limit. Engineer's thesis, California Institute of Technology. doi:10.7907/Q6A7-1796. https://resolver.caltech.edu/CaltechETD:etd-01272009-083535

Ringness, William Merritt (1949) The Effect of Surface Roughness upon 25 ST Aluminum Alloy Subjected to Repeated Tensile Stresses Above the Proportional Limit. Engineer's thesis, California Institute of Technology. doi:10.7907/WH57-T868. https://resolver.caltech.edu/CaltechETD:etd-02022009-093120

Wood, David Shotwell (1949) The Influence of Stress and Temperature upon the Time to Initiate Plastic Deformation in an Annealed Low Carbon Steel. Dissertation (Ph.D.), California Institute of Technology. doi:10.7907/5355-1Z24. https://resolver.caltech.edu/CaltechETD:etd-10222002-111754

Paul, Charles Craig (1948) The Design of a Multipurpose Chair for Children. Engineer's thesis, California Institute of Technology. doi:10.7907/hrn6-ym94. https://resolver.caltech.edu/CaltechTHESIS:03062024-191723786

This list was generated on Thu Apr 25 11:31:19 2024 UTC.